The circular saw is a compact and at the same time productive tool for carpentry work on wood (sometimes sheet metal), created mainly for a home workshop. According to the design and the leading power element of the “circular” is conditionally divided into three classes:
- network manual circular saws – have a nominally high power with respect to their “junior” analogs, working on battery
- rechargeable manual circular saws – their advantage lies in greater mobility since the reliance on power supply does not interfere with the movement;
- stationary circular saws of machining type – massive and powerful installations for carrying out serious carpentry.
The main problem that prospers potential buyers at the stage of choosing a circular saw lies in ignorance of the main parameters that are worth paying attention to, as well as in the abundance of models from numerous manufacturers. To greatly facilitate the task, we have compiled for you the rating of the eight best saws in three main categories. The selection of applicants took place according to the following criteria:
- Atypical model for the manufacturer’s line;
- the opinion of users regarding various aspects of the purchased goods;
- expert reviews on the validity of the purchase (price/quality ratio);
- a careful comparison of nominal characteristics.
Best Network Circular Saws
Network models are the first embodiment of circular saws. They are more powerful than the later battery analogs, but their problem lies in the limited range of use due to the length of the network cable. They are ideal for use in a stationary work area, but in the case of frequent movement, you should resort to the use of cordless saws.
3 BOSCH PKS 55
The model of the circular saw from the company Bosch, designed to surprise the adherents of the brand greatly. It cannot be badly spoken about: the operating parameters are at an altitude, as well as ergonomics. However, in production, apparently, something went wrong. As a result, the tool of excellent corporate quality turned out to be a “time bomb” – you never know when it will burn out. This is a powerful fact of indignation for users who are accustomed to receiving from the company if not perfect, then very close to that quality.
- good working parameters (perfectly handles even hard sorts of wood);
- ergonomics and reliability of the case.
- is capable of suddenly failing regardless of the service life (documented cases of tool failure after use from six months).
2 DEWALT DWE560
The most powerful circular saw of all presented in this category. It is in high demand among users due to the generally good reviews. The sawing of wood materials takes place at a speed of 5500 revolutions per minute – the tool is not afraid of obstacles in the form of the longitudinal unraveling of boards and sawing of thick bars in several passes. It is this fact that is decisive for the majority of users – DeWALT DWE560 is bought mainly for large-scale carpentry or construction works (for equipment of a professional workshop or building a house).
Easy to handle, unpretentious in maintenance, easy to set up and moderately productive – just so in a few words you can give an exhaustive description of this circular saw.
- ergonomic qualities at height;
- reliable plastic-steel case;
- The presence of a vacuum cleaner as an option;
- case is the set.
- there are restrictions on the shape of the neckline (a purely individual moment);
- The difficulty in finding and purchasing original disks.
1 MAKITA HS6601
The least powerful of competitors in the category, but one of the most stable “circulars” from the Japanese brand. It is designed for sawing hardwoods, though not at the fastest pace. In ergonomics of use, it is not necessary to doubt – the Japanese have worked on this component to the glory. In terms of performance characteristics, the Makita HS6601 also did not disappoint. The seed diameter of the shaft under the saw blade is standard 20 millimeters, so finding a replacement (if it is required at all) will not be a big problem. The height of the cut is limited by a figure of 55 millimeters – since the cut is mostly liable to boards of fifty, this indicator looks the most optimal.
- firm quality from “Makita”;
- The most common diameter for the fit of the disc;
- optimum cutting height;
- presence of a parallel stop and function of braking by the engine.
- not detected.
Best Cordless Circular Saws
As was said at the beginning, the main advantage of cordless circular saws is a high degree of mobility, which is compensated by low speed and relatively low power. Currently, manufacturers have come to a significant improvement in performance, but the additive to this component adversely affects the overall weight of the structure. The overall result is as follows: rechargeable saws are ideal for cutting materials from the soft and medium hardness of wood varieties, as well as thin sheet metal (mostly color).
3 RYOBI R18CS-0
Disc saw, great in its individuality. Perhaps the only element for which it is awarded praise is the combination of price and quality. Despite the unimaginably low for a tool of this class, the overall finish and engine life remain at a consistently high level. But regarding performance is increasingly confusing. The fact that the main “sore” Ryobi is the reluctance of manufacturers to customize components for a single and at least some popular standard. So, the landing diameter of the disk on this model is 16 millimeters. This is not as critical as, for example, in the earlier version of the saw with a ten-millimeter planting, but also requires an individual “treatment” in the form of a washer installation.
Here you can see a crazy thing in the form of a mismatch of the cutting line and the risks on the hull, the apparent (perceptible) play on the spindle, and also the unthinkable howl at the start of the engine (single cases).
- low cost;
- size of the staff disk (165 millimeters);
- the high quality of the case;
- significant engine life.
- the backlash of a spindle;
- rare landing diameter for the disc.
2 BOSCH GKS 10.8 V-LI 0
One of the most successful circular saws by Bosch. Judging by the feedback of users, many liked the dimensions and productivity of the tool, although the quality in individual moments could be higher. For a start about the disadvantages: native disks from “Bosch” at work a little leads away. Naturally, this reduces the accuracy of the sawing, but it is treated by installing other disks (from an equally famous company). The second drawback is a weak battery. For such a compact model, a battery of 2 Ah minimum is required.
Regarding positive moments in Bosch GKS 10.8, everything is more than good. First, consumers note the ease of the saw, which can be operated with one hand. Secondly, it is necessary to note small, but pleasant trifles, such as the indicator of a charge of the accumulator, presence of a regulator of deepening and directing. As a result, we have a very expensive, but fully justified, purchase for a home and a home workshop.
- Compatibility with the entire range of tools from Bosch;
- good equipment;
- the presence of useful trifles (backlight, charge indicator, etc.).
the high cost of tools and components;
sometimes disc is removed.
1 AEG BKS 18
Powerful, and at the same time not the most expensive in its class, a circular saw that can be a good addition to the home carpentry workshop. Under the age-old brand of the once main supplier of weapons in Germany, a group of companies, headed by a large global concern Electrolux, has now settled. In general, the quality of the instrument produced by them meets high world standards, which, surprisingly, is not always reflected in the price.
AEG BKS 18, of course, is a worthy representative of a German firm. The accumulator disk saw almost completely replaces the network analogs – despite not the most capacious and strong battery voltage enough to drive up to 2500 rpm. This allows you to easily saw 50-millimeter boards both across and dissolution along. The only problem is manifested in the warm season: in the heat, the battery quickly overheats, and an attempt at a long cut leads to the activation of the protection unit.
- attractive price;
- great quality;
- high performance.
- rare cutting discs (under the landing size of 15.87 millimeters);
- In warm weather under load the battery overheats.
Best Machine Circular Saws
Real giants of carpentry, guaranteeing the most accurate and fast cutting even hardwood varieties. Have an additional work area in the form of a table, which can be used as a workbench for installing another tool or performing carpentry operations. Much more powerful than hand-held circular saws, but less economical and more expensive to purchase.
2 INTERSKOL DPN-250 / 1500P
If in the category of hand-held circular saws Interskol has periodic problems, then in the case of stationary sawmills, things are much better. And the essence here is not only in good technical characteristics – the table layout is interesting in that it has elongated side parts that can be conveniently used as a simple workbench (carpentry operations or tool fastening). It is also remarkable that even with such “sides” the machine remains quite compact, which is very popular with users.
The second important factor is the rated power. 1500 W is more than enough for unhindered sawing boards with a thickness of 50 millimeters along the entire length, without wedges and tears. The adjustments are accurate, the loopholes are minimal, but there was one serious disadvantage: users complain about the lack of a smooth start of the engine. This defect is “treated” by an independent interference in the internal device. However, such measures automatically take the machine out of warranty service.
- it is convenient to use as a workbench;
- fine-tuning of parameters;
- high power.
- no soft start of the engine.
1 METABO BKS 400 PLUS – 3.1 WNB
Serious professional precision machine for carrying out carpentry and carpentry. Easily saws wood materials, which contributes 3100 watts of nominal power, as well as sheet metal when installing the appropriate disk. In accordance with the price level, the developers have verified almost all the nuances and leveled the weaknesses that are typical for disc saws: backlashes, minor misalignment of the table near the sawing disk, equipping the engine with an electronic soft start and braking unit.
In addition to the standard set of functions, a dust bag is installed in the Metabo BKS 400 Plus, and it is also possible to connect a vacuum cleaner (for pulling the chips straight from the work area). The main plus relates to the same engine – the presence (one more) of the electronic protection unit makes it almost unattainable, for which, in fact, users prefer this machine.
- presence of protection blocks, soft start and emergency braking of the engine;
- can be used as a workbench;
- comprehensive equipment.
high cost (offset by build quality).
You may also Like :